Another stupid 'my corner of the web' blog. I plan on this being my outlet for frustration long after my friends have died of boredom listening to me rail for/against "The Man". Then, instead of complaining, I'll just point my friends here!

11.28.2005

Flickr is pretty cool!

And only moderately beastly to upload to, from Linux, using Picassa. The Uploadr seems to work fine using Wine, which is pretty cool. Now, if I could only get Picassa to pull pictures from my USB camera properly. I get a bizarre usb error:
usb 2-4: new full speed USB device using ohci_hcd and address 4
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 2-4: USB disconnect, address 4
usb 2-4: new full speed USB device using ohci_hcd and address 5
usb 2-4: device descriptor read/64, error -110
usb 2-4: device descriptor read/64, error -110
usb 2-4: new full speed USB device using ohci_hcd and address 6
usb 2-4: device descriptor read/64, error -110
usb 2-4: device descriptor read/64, error -110
usb 2-4: new full speed USB device using ohci_hcd and address 7
usb 2-4: device not accepting address 7, error -110
usb 2-4: new full speed USB device using ohci_hcd and address 8
usb 2-4: device not accepting address 8, error -110
Very Strange. Then the camera freezes. Must be a problem with kernel 2.6.14, 'cause I'm sure I had it working before.

3 Comments:

Anonymous Anonymous said...

Yes, very frustrating. I got the following after plugging in a 1G usb stick that says "Linux compatible" tried it on 2 different machines with different kernels, same shit.

Vendor: USB 2.0 Model: Mobile Disk Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 2009088 512-byte hdwr sectors (1029 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 2009088 512-byte hdwr sectors (1029 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda:<6>usb 1-7: reset high speed USB device using ehci_hcd and address 4
usb 1-7: device descriptor read/64, error -110
usb 1-7: device descriptor read/64, error -110
usb 1-7: reset high speed USB device using ehci_hcd and address 4
usb 1-7: device descriptor read/64, error -110
usb 1-7: device descriptor read/64, error -110
usb 1-7: reset high speed USB device using ehci_hcd and address 4

5:22 PM

 
Anonymous Anonymous said...

Im having the same problem with a flash drive.

Seems to be the PCI system / ACPI related. Not sure though. Try booting with the noacpi option enabled in grub.

9:20 PM

 
Anonymous Anonymous said...

kj

11:51 AM

 

Post a Comment

Links to this post:

Create a Link

<< Home